Unitex 777 Texture 15Lt

$86.16
In stock
SKU
3313553001568
  • Buy 6 for $84.01 each and save 2.5%
 

 

Please call for a quote on shipping and to confirm stock availability.

PH: 03 8535 4115

 

Unitex 777 Texture 15Lt

Unitex® Applied Texture Finishes are acrylic based textured coatings designed for decorating exterior walls. Unitex®
Applied Texture Finishes are suitable for use over surfaces prepared with Render from the Unitex® Specialty Renders
range. Uni-Trowel Décor™ 777, as part of the Unitex® range of Applied Texture Finishes, is designed for trowel application in a single coat on rendered exterior walls where a long lasting decorative medium sand grain texture finish can be expected.

Regular users of Uni-Trowel Décor™ 777 praise its improved workability, more defined texture structure and
reduction of “dead spots” in the surface finish compared with other medium grain Applied Texture Finishes. UniTrowel
Décor™ 777 can be supplied in white or in your choice of light to medium strength colours.

 

Unitex 777 – Medium Grain Finish

 

Biological Resistance
Resistance to attack from bacteria and fungi is provided. This product being a water based acrylic system offers safe handling and low toxicity properties. Dirt, grime and dust on the surface of coatings will act as seed beds for bacterial attack, therefore cleaning and maintenance of your coating is essential to hinder bacterial and fungal attack.

Fire Resistance The full Unitex coating system when subjected to the Early Fire Hazard Tests – Australian Standard AS1530.3:1999 meets the strictest standards.

Water Resistance
The coating, even at exceptionally high build, is formulated with a water vapour permeability factor to allow water vapour from the substrate to leave unhindered and to rainproof the exterior. Rising damp and elevated levels of moisture in the substrate will damage, and possibly delaminate, the surface coating. Please ensure that damp coursing the substrate is in place and prior test moisture content with a moisture meter (maximum 12% WME is allowed) (Builder responsibility).

Colour
The pigmentation is completely integrated during the manufacturing process, which means colour through the entire film thickness. Applied Finishes are available in a practically unlimited range of full colour to pastel shades. Please contact Unitex for the full range of colours available.

Note: Some deep tones cannot be supplied in applied finishes. Contact Unitex for your specific solution. All colours will fade to some degree with time in exterior systems. Do not apply pigmented texture coats over fresh and or not fully cured renders as efflorescent damage (white blotching) may occur. Each pail has a label with the unique code identifying the particular texture type, colour and batch number. This coding ensures that if you require additional product (say to finish off a job), Unitex can match the texture and colour to the original. Note: Conditions on site may change and therefore colour outcome may be different when applied under varying weather conditions.  It is advisable always order 1 or 2 more pails than are required for the job. The pails have a strong sealed lid to prevent spillage if they should tip over before opening. Even after opening the lid still fits tightly enough when re-sealing to prevent contamination of the remaining product. The product must be protected from heat and cold during transit and storage.

 

More Information
Brand Unitex
Sheet Length Sheet Size
Sheet Length 1.2m x 2.4
Write Your Own Review
You're reviewing:Unitex 777 Texture 15Lt
Your Rating
Copyright © 2024 Render Supply Co. All rights reserved.