Smartbond Foam Cleaner 500 ml
- It is used both for cleaning guns and manual cleaning of tools. It cleans and removes grease from iron, steel, chromium, aluminium, non-varnished wood, marble and stone. It removes grease, oil, tar, wax and residuals of polishes, adhesives and fresh sealants.
USE
Smartbond cleaner removes fats, oils, tar, waxes, non hardened polyurethane foam, glue
residue, fresh sealants.
It is also used for gun cleaning. Do not remove hardened PU foam from the pistol with
sharp objects.
TEHNICAL DATA
Colour: colourless
Solubility in water: soluble
APPLICATION
Saturate linen cloth or colourless paper in tekapur cleaner and wipe the surface. Repeat
the procedure with a clean cloth. On porous surfaces, leave the cleaner to penetrate the
surface and then clean.
Tekapur cleaner is used for manual cleaning as well as for gun cleaning. For manual
cleaning use a fixed spray cap mounted on the spraying accesory. With the application of
pressure to the cap cause the flow of the cleaner. For gun cleaning screw the dose with
the adapter onto the gun. The dose must not be placed sideway. Carefully pull the trigger
on the gun, to remove the foam residue from the gun. Once the cleaner starts to come out,
release the trigger. Leave the cleaner to work inside the gun for 1 to 2 minutes. Pull the
trigger again and hold it until a clean cleaner starts to come out. Repeat the procedure 2 to
3 times at each gun cleaning.
ATTENTION
• After gun cleaning remove the tekapur cleaner off the gun immediately
• Do not disassemble the gun
Make sure that the cleaner does not cause corrosion to the surface.
PACKING
• aerosol can of 500 ml, 150 ml
STORAGE
24 months (+10°C to +20°C)
Brand | BS |
---|---|
Sheet Length | Sheet Size |
Sheet Length | 1.2m x 2.4 |