Quikcote EPS Render 20Kg

Quikcote EPS Styrene Render 20Kg

• PRODUCT DESCRIPTION
  Quikcote EPS Styrene Render is a superior quality dry mix, cement based, high polymer render developed specifically for use as a Base coat render on EPS – Expanded Polystyrene panels. It has excellent
  adhesion, flexibility and strength.
•  
• Quikcote EPS Styrene Render provides the ideal base for the subsequent application of variety of top
  coat’s including Quikcote Decorative Finishes.
•  
• FOR POLYSTYRENE PANELS

This is a two coat system;
• Apply the first base coat of EPS Styrene Render onto the panel at a thickness of @ 3-4mm using a steel trowel with enough pressure to adhere the product. Whilst the base coat is wet embed a full layer of alkali resistant 160gm/m² (5mm x 5mm) fibreglass mesh ensuring that the mesh pieces overlap by a minimum of 100mm at mesh joints. Panel joints should be evenly covered with the same embedded mesh (avoid overlap of mesh joints near the main panel joint). Strips of mesh at 45 degree angle or equivalent, 300mm long by 100mm wide, should be embedded across the corner of all window and door openings. Level and finish of the first base coat using a polystyrene float.

• On firming of the first coat (1-2Hrs set time) apply a second coat of EPS Styrene Render at a thickness of @2-4mm. On setting use apolystyrene float, finish the surface to produce an even, uniform and level surface.

• This is a two coat system and a minimum thickness of 6-7mm should be achieved.