Medium Render 20Kg

Medium Render 20Kg

Product Description

Insulcon Render is a 20kg bag factory blended, acrylic render, suitable for application to a variety of building substrates. These include masonary brick, block work, concrete panels etc. Insulcon Render is ideal for a 2nd coat on Polystyrene Panels. Note—Insulcon Renders is not recommended for use on cement sheeting, as a 1st coat on Raw poly panels or painted surfaces.

Surface & Product Preparation

It is imperative that the substrate Insulcon Render is to be applied to is totally clean and removed of all loose particles, such as dirt, dust, etc. Failure to do so can cause delamination resulting in damage to the finish product. Insulcon takes no responsibility for problems arising from this. In a clean bucket add approx. 3-4 litres of clean water. Then whilst mixing with a mechanical mixer, add contents of Insulcon Render bag into the bucket. You may need to add some more Insulcon Render if you find the mixture to be too wet, or add some more water if you find the mixture too dry. A nice paste mix is the desired finish to achieve maximum results, both in finish and application. If the render is too wet, it can be very messy and difficult to apply, resulting in hanging too long on the wall, making floating very hard and time consuming. If the render is too dry then it will be very difficult to apply as it will not glide on the wall and will tear when floating. This can also have an effect on drying time, resulting in a compromised fast cured product.

Coverage

When Insulcon Render is applied according to manufacturers instructions, Insulcon Render will cover approx. 3 square metres on a 1st, and 3-5 square metres on a 2nd coat. Note - These areas may vary depending on substrates and quality of substrates. Ideal application thickness of 3-5mm for 1st coat is recommended. This may also vary.